►Drilling-free clip-on mirror design, does not take up dashboard space, without any tool can be connected and installed in 10 minutes, even Mums can finish it!
►The maximum stretching height is 80mm (3.15 in), so the minimum height of your rearview mirror should be less than 80mm. Note: The rear view mirrors of theMini CooperandNissan TITANare not suitable for installation.
Adjustable Monitor Picture
►The rotation function can be set with one key to flip the image up, down, left and right.
►You can set the appropriate flip image according to the camera installation position.
►Achieve a more realistic picture effect.
One Button Switch Setting
►4.3" IPS monitor screen, embedded in the rearview mirror.
►1080P HD clip-on mirror monitor provides a clear image.
►Short pressing the "power" button to turn on/off the monitor screen after you start the car.
Car Charger USB Interface Design
►The car charger is designed with an additional USB port (output 1-2A,5V), it not only supplies power for the baby car mirror monitor but also can charge other devices.
Night Vision
►This camera is designed for night vision, the back seat reading light needs to be turned on to achieve a colorful image in the case of no light or weak light.
Back Seat Camera Installations
►This baby monitor kit is equipped with two camera brackets that can be mounted under the headrest bars of the front or back seats, or on the side, windshield using a suction cup bracket.
Installation Instructions Steps Show
Installation Instructions
Monitor:
1) Clip the monitor to the rearview mirror.
2) Connect the car charger power cable with the monitor cable(the end with the word "12-24V").
3) Connect the car charger power cable and extension cable(the end with the word "monitor").
Camera:
1) Connect the tail cable of the camera(the end with the word "1080p")to theend of the extension cable with the word "camera".
2) Hold the camera with the clips of the headrest mount, and pay attention to keeping the camera out of the line position down to ensure that the monitor image is not upside down.
3) Mount the bracket to the metal pole of the car seat.
4) Alternative mounting method: You can also use the attached suction cup bracket to realize the mounting on the car glass window.
Wire Connections:
1) Use the plastic crowbar to make the wire easily plugged into the gap.
2) Please check whether the voltage is between 12~24V, the end of the extension cable with the word "Monitor" must be connected to the Monitor, the other end with the word "Camera" must be connected to the camera, and the Pins of the connector need to be aligned before they are connected.
You may also like
Recently viewed
Customer Reviews
18 Reviews
Thompson
2025.01.09
The UV light is very pure with the professional filter lens, no stray light at all. Works perfectly for lab experiments.
This is one of the best backup camera kits I’ve bought. Night vision works well even in dim parking lots, the guidelines show up clearly, and the overall build quality feels premium.